MECMESIN
Since 1977 Mecmesin has been designing reliable force, materials and torque testing solutions for quality control so that customers around the world can achieve consistent and accurate test results, every time. Operating under strict ISO 9001 quality standards Mecmesin products are used to guarantee the quality of components, materials and finished products for an extensive range of test applications across all industries.
Force Testing
VFG Touchscreen Digital Force Gauge
A handheld instrument built for tough environments to deliver accuracy and reliability. Designed for tensile and compressive testing in the field or as part of a testing system for use in production, QC and R&D labs.
- Full colour display that supports touch and gestures, with live graphing and customisable interface.
- Supports our range of external ‘Smart Sensors’ for a huge variety of applications.
- Capacity: 2.5 N – 2.5 kN. Capture readings from as low as 0.0005 N to 2,500 N.
- Accuracy: ±0.1 % of full scale.
- Storage: Expandable memory (Micro SD card – supports up to 32GB).
AFTI Advanced Force and Torque Indicator
A versatile force and torque display unit with interchangeable ‘smart’ sensors, that provides high accuracy and flexibility. The AFTI can be used as a handheld device for mobile applications, or it can be used as the measurement device for integration into your own test rig.
- Fully interchangeable ‘Smart’ sensors.
- Measurements made n N, lbf, kgf, kN, N.m, kgf.cm, lbf in, gf.cm and ozf.in with a sampling rate of 5000 Hz.
- Tension, compression and torque measurement with full unit conversion of displayed value.
- Reversible display – view readings even when the gauge is positioned away from you.
Alluris FMT-W40
The FMT-W40 is a motorised wire-terminal pull tester. It is available in 2 models with a tensile strength capacity up to either 500N (110 lbf) or 1000N (220 lbf).
- Accuracy: ± 0.5% of full-scale (f.s.).
- Acquisition Rate: 1000 times per second.
- Operating Force: 120% of f.s. (auto-reverses to release load if limit exceeded).
- Pull Speed Settings (mm/min): 10, 25, 37.5, 50, 100, 150 and 200.
- Memory: 1000 readings with max, min, mean and standard deviation calculations.
OmniTest 0.5/1/2.5
The OmniTest 0.5 kN, 1 kN and 2.5 kN models are part of the single-column range. They occupy minimal bench space. Weighing under 30kg, it can also be easily transported. The 2.5 kN model is particularly popular as a general-purpose tester whilst the 0.5 and 1kN models have extended column lengths making them particularly suitable for long-elongation, low-force testing.
OmniTest 5/7.5
The OmniTest 5 kN and 7.5 kN models are part of the single column range. They take up minimal bench space and their mid-range load capacity makes them ideal for applications that might have required a larger investment in a twin-column tester.
OmniTest 10/25/50
The twin-column OmniTest is available in three frame sizes with load ratings of 10 kN, 25 kN, and 50 kN. These all-purpose UTMs are ideally suited for testing stiff materials requiring higher loads, as well as being perfect for long-elongation, low-force tests and for mounting larger specimens that cannot easily be accommodated on single-column test frames.
Torque Testing
VTG Tornado
The VTG Tornado touchscreen torque tester is portable and rated to IP54 for testing the applied and release torque of a diverse range of products. Measures up to 10 N.m (90 lbf.in) to capture opening and closing torque of caps/closures intended to be opened by hand.
- Resolution: 1:50,000
- Accuracy: ±0.5 % of full scale
- Units of Measurement: mN.m, N.cm, N.m, gf.cm, kgf.cm, kgf.m, ozf.in, lbf.in, lbf.ft
- Sampling Rate: 5,000,000 Hz
- Overload Rating: 150% of full-scale
- Weight: 3 Kg
Orbis
The Orbis digital torque tester is ideally suited for basic clockwise and counter-clockwise torque tests. Manually operated and measuring up to 6 N.m, its capacity is ideal for most caps and closures which are intended to be opened by hand. Providing data with significantly greater accuracy than analogue torque devices, it’s a simple and cost-effective solution for a variety of torque applications.
- Accuracy: ±0.5 % of full scale
- Units of Measurement m, N.cm, N.m, gf.cm, kgf.cm, kgf.m, ozf.in, lbf.in, lbf.ft
- Sampling Rate: 5,000 Hz averaged to 80 Hz or 2,000 Hz peak capture (user selectable)
- Overload Rating: 150% of full-scale
TSCC Torque Screwdriver Check Calibrator
The TSCC is a semi-automated test system for checking the calibration of pre-set and adjustable torque-limiting screwdrivers, up to 10 N.m. With pre-programmed tests and one-touch operation the TSCC eliminates inconsistencies in results and repetitive strain injury for operators, which is often associated with manual testing.
Helixa-i
The Helixa-i is a precision torque tester controlled by software running on a PC. Designed for precision torque applications where torque forces may be very small and accuracy is the priority. With a wide range of precision fixtures, the Helixa-i is easy to use and optimised for measuring torque from 1 mN.m to 6 N.m.
Vortex-i
The Vortex-i is a top of the range torque tester controlled by software running on a PC. Accurate, easy to use and optimised for measuring static torque up to 10 N.m. The ultimate flexible solution for automated torque testing of a wide range of closures and components.
ABC-t
The ABC-t is an automated bottle closure tester to measure both initial slip and bridge torque of a complete batch of roll-on-pilfer-proof (ROPP) closures. Automated batch testing of closures ensures repeatability without the need for an operator during the testing period.